Artist Spotlight: Simon Philips
-Simon Philips
Drummer extraordinaire turned producer Simon Philips knows a thing or two about what vintage gear sounds like, and has a special appreciation for BAE Audio. “I began my recording career in the early 70s at the age of 16, and I played through a lot of classic consoles of that era around London when they were still new,” he says...
Read More
6 Space Rack
6LB
11 Space Rack
Rack Ears
500 Series Racks
500 Series Racks Features
500 Series Racks are available as 11 space Rackmounts, 6 space Rackmounts and 6 space Desktop Chassis.
- Strong steel chassis - not aluminium
- Shielded wires on individual connectors for serviceability- no PCBs
- XLR inputs and outputs
- Remote power supply keeps power transformer interference away from modules
*If you purchased a BAE Chassis after June 1st, 2012 you can convert it into a rack-mount version by buying the rack ears separately ($175 per pair).
If you purchased a BAE Chassis prior to June 1st, 2012 then your unit will not be compatible.
6 Space Rack w/1.6 Amp 1 XLR PSU MAP: $675.00
6LB 6 Space Chassis w/1.6 Amp 1 XLR PSU MAP: $675.00
Kit to convert Chassis to 6 Space Rack MAP: $175.00
11 Space Rack w/2.1 Amp 1 XLR PSU MAP: $1,050.00
500 Series Racks Specifications
Small Bi Polar, 6 Space Rack
+/- 16V 1.6 Amp
Large Bi Polar, 11 Space Rack
+/- 16V 2.1Amp
Power Requirements
115/230 VAC, 36W
Weight (Empty)
8 LBS / 3.63 KG
Dimensions in Inches
9.25W x 5.25L x 10D
19W x 5.25L x 10D
8CM Fully Loaded
8CM Back
8 Channel Mixer
8CM Features
The 8CM is an 8 channel mixer that can house the 10 series modules such as the 1073, 1084, 1023 and 1004.
Both mic and line inputs of each module can be mixed to either left or right channels with individual pan controls and output level. A stereo output is also provided for attenuating all channels.
Bussing amplifiers are the same Class A amplifiers used in our 1272's to retain that signature sound.
The 8CM can also be used as a 10 series rack with 8 direct outs.
8CM 8 Channel mixer w/power supply 48v MAP: $3,600.00
*Modules not included
8CM Blank Panels MAP: $80.00
8 Channel Mixer Specifications
Power Requirements
115/230 VAC, 42W
Weight (Empty)
15 LBS / 6.80 KG
Dimensions (in Inches)
19W x 8.75L x 16D
8CR Fully Loaded
8CR Back
8 Channel Module Rack
8CR Features
This is an 8-module self-powered rack for vintage Neve™* 10-series 8 3/4" high modules including the 1066, 1073, 1084 and our reproduction 1073 and 1084 modules.
Each module has its own separate output level control and lighted 48v phantom power switch. The back panel has XLR connectors for mic input, line input and output. The oversize external power supply puts out two times the current necessary to power the rack. It has an extra DC outlet which will operate any of our 1272 preamps or Class A Mixers.
The power supply may be set for 220/240 volt operation for Europe or Australia at no extra charge. As well we can set it for 100 volt operation for Japan at no extra charge.
8CR Channel Rack w/power supply 48v MAP: $2,600.00
*Modules not included
8CR Specifications
Power Requirements
115/230 VAC, 39W
Weight (Empty)
12 LBS / 5.44 KG
Dimensions (in Inches)
19W x 8.75L x 16D
3LB Loaded
3LB Back
1073D in 3LB
3LB
3LB Features
The 3LB incorporates 3 slots for 500 series modules or the 1073D in a 3 space chassis.
- Solid steel chassis.
- Inputs and outputs on either side.
- An overbuilt power supply for third party modules.
- The same hand-wired construction that BAE is known for.
3LB MAP: $525.00
3LB Specifications
Power Requirements
115/230 VAC, 36W
Power Output
+/- 16 VDC 1.6A (0.8A/per Rail)
48VDC .1A
Weight (Empty)
6 LBS / 2.72 KG
Dimensions (in Inches)
11D x 10W x 5.5H
Front
Back
Loaded
R53
R53 Features
3 channel horizontal 500 series rack with linking option.
- Strong Steel Chassis - not Aluminium
- Shielded wires on individual connectors for serviceability- no PCBs
- Neutrik XLR Inputs and Outputs
- Direct output or link to create a channel strip
MAP: $550.00 Unloaded
