Artist Spotlight: Simon Philips
-Simon Philips
Drummer extraordinaire turned producer Simon Philips knows a thing or two about what vintage gear sounds like, and has a special appreciation for BAE Audio. “I began my recording career in the early 70s at the age of 16, and I played through a lot of classic consoles of that era around London when they were still new,” he says...
Read More
1 XLR Bi-Polar PSU
2 XLR Bi-Polar PSU
Bi-Polar PSU Back
Bi Polar Power Supply
Bi Polar PSU Features
- Convertible to 230, 240, 100 and 220VAC
- The same hand-wired construction that BAE is known for.
- Includes AC Cable
PSU for 6 Space Rack/Lunchbox | Single or Dual 19" (1.6 Amp w/1 XLR)
MAP: $330.00
PSU for 11 Space Rack (2.1 Amp w/1 XLR)
MAP: $430.00
Bi Polar PSU Specifications
Small Bi Polar, 6 Space Rack
+/- 16V 1.6 Amp
Large Bi Polar, 11 Space Rack
+/- 16V 2.1Amp
48V
.1 Amp
Weight
4 LBS / 1.81 KG
Dimensions in Inches
5.75W x 3.5L x 7.5D
24V PSU
24V PSU Back
24V Power Supply
24V PSU Features
Remote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality.
- Convertible to 230, 240, 100 and 220VAC
- The same hand-wired construction that BAE is known for.
- Four foot cable capable of four times the current needed by the preamps.
- Includes AC Cable
24v Power Supply MAP: $330.00
24v Power Supply for 8CR & 8CM MAP: $430.00
24V PSU Specifications
Weight (Module/Rackmount)
4 LBS / 1.81 KG
Dimensions in Inches (Module/Rackmount)
5.75W x 3.5L x 7.5D
1272
1272 Inside
1272 Module
1272 Module Features
The 1272 module made by BAE is built to specifications to be used in original Neve® consoles.
- Built to specifications for Neve® consoles.
- The same hand-wired construction that BAE is known for.
1272 Module MAP: $750.00
1272 Specifications
Frequency Response
+/- 0.5dB 20Hz-20kHz
Frequency Response
+/- 0.5dB 20Hz-20kHz
Mic Input Impedance
1200 or 300 ohms
Output Impedance
50 ohms
Common Mode Rejection Ratio
100dB min @ 60Hz
Maximum Output Level
+27.4 dBu @ 600Ω
Power Requirements
80mA @24VDC
Gain
39dB External Gain Optional
Equivalent Input Noise
Better than -85dBu
Weight
4.25 LBS / 1.93 KG
Dimensions (in Inches)
5.25W x 1.8L x 8.5D
Single Rackmount
Dual Rackmount
Module Front
Module Inside
Single XLR PSU
312A Rackmount & Module
"This new flexible EQ range on the 312a is a dream come true for a tech head like me! I literally couldn’t ask for anything more!!"
JR Hutson
American Soul and R&B Producer and Songwriter
312A Features
The 312A is available as a 500 series module or a single or dual channel 19" rackmount.
Because there are no capacitors in the audio path, the 312A is super fast and punchy, allowing transients to pass easily, making them a favourite for drummers.
Made with the highest quality parts including Jensen input and output transformers and the BAE 2015 opamp. The 312A also includes a high impedance DI for instruments.
- Made using BAE 2015 opamps
- Supplied with Jensen input and output transformers.
- Remote power supply with four-foot cable capable of four times the current needed by the preamps for optimum sound quality.
- Switches have gold contacts for long life.
- XLR connectors on the back for mic input and output and phone jack in front for direct input.
- High impedance direct input for guitar and synthesizer.
- Separate front panel switches for phantom power.
312A pair mic pres w/power supply MAP: $2,090.00
312A pair mic pres w/out power supply MAP: $1,870.00
312A Single mic pre w/power supply MAP: $1,100.00
312A Single mic pre w/out power supply MAP: $880.00
312A Module (Compatible with API 500 series) MAP: $860.00
312B Module (Same 312A sound with extra 5db on the pad) MAP: $860.00
312A Specifications
Frequency Response
5Hz to 75kHz (-3dB)
Mic Input Impedance
≈1400 ohms
Line Input Impedance
10k ohms
DI Input Impedance
≈250k ohms
Output Impedance
75 ohms
Common Mode Rejection Ratio
110dB min @ 60Hz
Maximum Output Level
+27.1 dBu @ 600Ω
Power Requirements
115/230 VAC, 27W (Rackmount)
40mA per Rail (Module)
Gain dB
10 to 66 dB
Equivalent Input Noise
-120 dBu; Unweighted 300kHz Bandwidth
Weight (Module/Rackmount)
1 LBS / 0.45 KG (Module)
7 LBS / 3.18 KG (Single Rackmount)
8 LBS / 3.63 KG (Dual Rackmount)
Dimensions in Inches (Rackmount/Module)
19W x 1.75L x 9D (Rackmount)
1.5W x 5.5L x 6D (Module)
